Home Contact About GSE Login  

 
Indicators

> Model 250
> Model 255
> Series 460
> Series 560
> Series 660




 
Indicators 
Washdown Indicators 
Parts Counting 
Hazardous Area 
Floor Scales 
Portable Scales 
Check Weighers 
Bench Platforms 
Tank Weighing 
Airline Systems 
Agrifeed 
Pharmacy Scales
Overhead Weighing
Vehicle Scales

 
 
    Home > Indicators > Series 350
 
  Approvals
  Literature
  User Guide
  Calibration
 
 
 
COMMUNICATIONS  
  Port 1 RS232 bi-directional serial port or RS485 Opt. Or 20mA Opt
  Data Output String Fourteen (14) selectable fixed-format transmissions available, 1 custom format (programmable via RS232)
  Protocol Selectable
  Baud Rate 150-9600 bps
DISPLAY  
  LED 6-digit weight display, 0.8" (22mm) height
  LED 11 LED annunciators for operational status
  LCD 6-digit weight display, 1" (25mm) height
  LCD 11 LCD annunciators for operational status
  LCD Includes LCD checkweight/sort bar
ELECTRICAL  
  Power Requirement Zinc die cast enclosure: 12 - 26 VAC/ 12 -36 VDC
  Power Requirement Stainless steel enclosure: 90 - 250 VAC/ 12 -36 VDC
  Excitation Voltage 10 VDC, short circuit protected
  Max. Excitation Current 180 mA, power (6) 350 ohm bridge
  Fuse 0.8A Slow - Blow (when using AC power)
  Signal Input Sensitivity 0.1 - 20 mV/V
  Signal Connection 4 or 6 lead with sense leads
ENCLOSURE  
  Zinc Die Cast Black powder coat paint, self-standing on flat surface
  Stainless Steel Designed to NEMA 4X, IP65 included swivel bracket/stand
  Shipping Weight 7lb (3.2 kg) zinc die cast
  Shipping Weight 6lb (2.7 kg) Stainless Steel Enclosure
  Keypad 5 key, durable elastomeric (rubber)
PERFORMANCE  
  Full Scale(F.S.) Selectable 0 to 999,999
  Resolution 20-bit A/D converter, 100,000d displayed
  Resolution 1,000,000d internal
  A/D Conversion 60 Hz
  Zero Track 0 - 100% of F.S.
  Zero Range Selectable, 0.01-100% Full Scale
  Operating Temperature -10 Degrees Centigrade to +40 Degrees Centigrade
  Units of Measure lb, kg, oz, g, lb oz
  Warranty 2 year limited
  Non-Linearity 0.005% Full Scale, Load Cell dependent
  Time/Date Clock Volatile
PROCESS CONTROL  
  Outputs Selectable modes such as target and preact learn
  Outputs Annuciators and baragraph (LDC only) indicate status on both LED and LCD displays.
  Outputs Relay output module is optional (3 outputs)
  Remote Input 1 momentary contact closure (100ms minimum) Tare, Print, Zero, activate output
Selectable Weighing Units Lb, kg, oz, g, lb-oz
Time and Date Clock
LED or LCD Display
Panel Mounting
Remote Tare, Print, Zero
 
  Analog Output Module
  Relay Output Module
  Battery Operation
  RS485 Module
  20 mA Current Loop
  Fiber Optic Transceiver in Com Port 2
  Wall Mount
  Panel Mount Kit
 
  Checkweighing
  Process Control
  Food Processing
  General Industrial Weighing
  Inventory Control and Counting
  General Agricultural
Site Access & Terms Policy || Copyright © 2005 GSE Scale Systems